EAGTAC P Series P20C2 LED Flashlight Up to $4.00 Off w/ Free S&H — 2 models

Specifications for EAGTAC P Series P20C2 LED Flashlight:

Features of Eagtac P Series P20C2 LED Flashlight:

• Tactical forward clicky switch + head twisty
• Easy and Trusty operation
• Slighly press the tailcap button for momentary on/off
• Turn the flashlight by pressing the tailcap button until it clicks
• Click again to turn it off.
• Hold the body and tighten the head to enable turbo output
• Loosen the head to enable general output mode
• You can pre-select output setting before turning on.
• To access hidden low and auxiliary modes
• with the head loosen
• tighten and loosen the head within one second to activate the hidden settings
• It starts from low output mode
• repeat the action for strobe (10hz)
• hi-flash (1.7hz)
• and SOS modes.
• Turbo boost technology is activated every time you turn on at turbo output setting for maximum brightness
• It lasts for three minutes and then it reduces its regulated output by 20% to prolong runtime
• Its normal for the light to get warm at such level
• Do not leave the light running unattended.
• Gorgeous Knurling.
• Supreme handling.
• The CNC precisely cut and rolled rectangle-shape and square-shape knurling provides a sure grip throughout the entire flashlight body.
• Reverse polarity protection
• Your safety is our first priority
• Inserting battery in the wrong direction may lead to serious damage to the flashlight and the battery
• We incorporate a physical structure to protect against reverse polarity without compromise (battery with a protruding button top is required).
• Smart head design.
• Excellent thermal path
• The one piece LED module and custom LED star board with highly thermal conductive isolation layer allow the LED to dissipate heat quickly to the outside world
• This result in higher output and longer LED life (LED dims as junction temperature increases).
• Durable structure against drop impact
• The stainless steel bezel provides highly drop resistance and make it easier to shatter window as needed
• O-ring is used as cushion to protect and waterseal the harden waterwhite glass lens (with both sided anti-reflective)
• Paracord lanyard.
• Carry the mil-spec paracord lanyard with or without the pocket clip.
• Stainless steel pocket clip.
• The titanium coated stainless steel pocket clip clips on almost everywhere
• To remove it
• with tailcap and body tube o-ring removed
• loose the clip retainer ring and pull the clip
• Ensure the clip retainer ring is fasten securely
• otherwise the light may not light up.
• Tail-stand ability.
• Light candle.
• With the pre-installed lanyard ring removed (use any sharp tool to remove the lanyard ring from the tail-cap)
• install the included tail-stand rubber
• Place the flashlight on any flat surface to light up the surrounding.
• Included Accessories:
• Tail-stand rubber boot
• Mil-Spec paracord lanyard w/ quick attachment clip
• Heavy duty nylon holsterw/ self-retention device and flip

Package Contents:

• EAGTAC P Series P20C2 LED Flashlight